Candidate must have cleared Technical College or High School.

All Fresh candidates can apply who are technically skilled in any Discipline such as Mechanical, Civil, Electrical; Instrumentation etc.

Extensive Training will be provided to them before inducting.

Position will be based in Jubail and/or Dammam.
Initial training will be given for 4 to 5 months and will be inducted in to respective departments accordingly.
Education
Technical Education / High School
 

Must be a diploma holder in Electricals or Certified in Electrical Technology Course
Knowledge in installation, electrical maintenance and use of electrical testing equipment is preferred.

Knowledge includes electrical equipment fault diagnosis, breakdown repairs, and preventative maintenance and overhauling work is preferred.

Ability to read and interpret engineering electrical drawings, schematics and manuals, fair report Writing skills, fair spoken and written English.

Must be hard working and attend emergencies individually.

Must have the ability to work effectively and be good team player.

Ability to work in shifts and hard working

Must have the ability to work effectively in multi-cultural team and be a good team player.

On the job trainee we will be given to the selected candidates

Note: Extensive Training will be given for 3 to 6 months and inducted in to the company accordingly
 

Candidates should preferable have knowledge of all mechanical fabrication activities

Preferably he should have knowledge on workshop fabrication of pipe and steel structures i.e. all sizes schedules and materials of pipe, tube, vessels, platforms, steps and ladders etc.

Read and understand blue prints, schematic drawings and isometric sketches.

Must be hard working and attend emergencies individually.

Must have the ability to work effectively and be good team player.

Ability to work in shifts and hard working

Must have the ability to work effectively in multi-cultural team and be a good team player.

On the job trainee we will be given to the selected candidates

Note: Extensive Training will be given for 3 to 6 months and inducted in to the company accordingly

Must be a diploma holder in Instrumentation or Certified in instrument Technology Course.

Must be able to interpret P&ID, Plot Plans.

Sound knowledge in preventive maintenance, troubleshooting & repairs, calibration, overhauling & testing.

Must be hard working and attend emergencies individually.

Must have the ability to work effectively and be good team player.

Ability to work in shifts and hard working

Must have the ability to work effectively in multi-cultural team and be a good team player.

On the job trainee we will be given to the selected candidates

Note: Extensive Training will be given for 3 to 6 months and inducted in to the company accordingly

Must be a Diploma holder in Welding or Certified in welder Technology Course.

Preferably should have knowledge on various welding equipment and tools to execute welding activities.

He should have some idea on welding of carbonized, stainless and low steel, cast iron, aluminum and other metals.

Preferably he should have valid welding certification from approved organization.

Must be hard working and attend emergencies individually.

Must have the ability to work effectively and be good team player.

Ability to work in shifts and hard working

Must have the ability to work effectively in multi-cultural team and be a good team player.

On the job trainee we will be given to the selected candidates

Note: Extensive Training will be given for 3 to 6 months and inducted in to the company accordingly

Fresh graduates with University Degree (Bachelor) Major: ELECTRICAL ENGINEERING

Preferably should have Knowledge of SABIC Engineering Specifications & applicable Industry Standards and Codes.

Ability to read and interpret engineering electrical drawings, schematics and manuals, fair report Writing skills, fair spoken and written English.

Must be hard working and attend emergencies individually.

Must have the ability to work effectively and be good team player.

Ability to work in shifts and hard working

Must have the ability to work effectively in multi-cultural team and be a good team player.

On the job trainee we will be given to the selected candidates

Note: Extensive Training will be given for 3 to 6 months and inducted in to the company accordingly

Must have a minimum of ten Years experience in the position of Cost Engineering in Construction WORK including, but not limited to Estimating, Preliminary Costing, Prepartion of Bills of Quantity and Bills of Material, Quality Scopes of Work, Variation Costs and Final Accounts.Must be fully conversant in all aspect of Construction and Renovation Work.

Electrical engineer prepares for checking by the Saudi Aramco Project Engineer load calculations as required for determining power requirements, service requirements, cable and conduit sizes, illumination levels, lighting design and voltage drops.

prepares design for communications systems; sketches circuit and schematic wiring diagrams for drafting by the design draftsman.

Uses up-to-date technologies and assists Saudi Aramco Project Engineer to identify other necessary design elements to comply with code and other requiements.

Well versed with the National Electric Codes (NEC) / Uniform Building COde/ Uniform Fire Code and other U.S. or European building codes.

Must possess a Bachelor of Science Degree in Electrical / Mechanical Engineering as a minimum requirement and shall have passes National Licensure Examination.

Mechanical Engineer shall prepare load calculations as required for determining water and efulent flows and pipe size;

sketches riser diagrams and other plumbing drawings for drafting;

layout fixtures and pipe runs;prepare thermal load calculation;

determine ventialtion nad all quality requirments and size equipment;

laysout all necessary system for drafting.Well versed with the Uniform Mechanical Code / ASHRAE / Uniform Plumbing Code / Uniform Fire Code and other U.S. or European building codes.

Must possess a Bachelor of Science Degree in Electrical / Mechanical Engineering as a minimum requirement and shall have passes National Licensure Examination.

Must possess five (5) years experience, from the date of qualification, in building construction planning and scheduling work activities. Preferences will be given for experience with Access and Excel.

Shall have training/ or experience in scheduling and statistical data recording/evaluation and shall be able to type at 45 words per minute at 90% accuracy.

Shall also be able to enter and read data from personal computers.

Prepare reports and inputs data into Saudi Aramco system(s), with supporting information including materials lists, manpower estimates and work phasing.

High School plus technical college

Looking only for Filipinos applicants

Required experience in building construction/maintenance, including 3 or 4 years experience in engineering design office writing work scope and technical specification.

Shall be able to read technical drawings and interpret technical requirements for constructions and shall  have knowledge of American codes and design practices.

work experience and shall be fluent both in written and spoken EnglishMust posses a Bachelor of Science Degree in Civil/Electrical/Mechanical

Looking only for Filipino candidates.

Act as project lead architect for commercial, light industrial, institutional and residential facilities.

Shall have experience in Developing perspectives, renderings and scale model of proposed designs.

Provide technical support during construction phase. Assigns and supervises design draftsmen. Experienced in the Uniform Building Code and other US or European Building Codes

Must possess a Bachelor Degree in Architecture as a minimum requirement with PRC

Looking only for Filipino Candidates

MAIN DUTIES & RESPONSIBILITIES:
With experience in installing and maintaining all kinds of instrumentation and control devices
• With extensive experience in maintain gauges, automatic lubrication systems, tank leveling systems, control panels, etc.
• Should be experienced in DCS, SMART field transmitters from Rosemount and other field instruments.
• Should have knowledge in calibration in all type of instrument
• Should have knowledge in loop checking from field instrument to DCS via field JB’s.
• Should also be familiar with international codes and standards, IT hardware and advance Windows 98, 2000, XP and NT 4.0 operating systems is required.

Should have knowledge in Calibration/ Installation/ testing and commissioning Instrumentation and Controls such as DCS, PLC, Marshalling Cabinet, Control & ON/OFF valves, field transmitter "i.e." flow, level, pressure transmitter etc.

Good Potential for the field construction works in the long term opportunity for career development and fully utilizes the capabilities gained through technical qualifications and years of experience.        

                                                                                                                                               Good communication skills.
He should have 5 to 8 years of experience

Education - Engineering and/or technological university graduate

Professional certification - College or Technological university diploma

Should have knowledge in Construction installation work for Cable tray, panel board, conduit, cable including termination/ testing and coommissioning.

Good Potential for the field construction works in the long term opportunity for career development and fully utilize the capabilities gained through technical qualifications and years of experience.

 With experience in installing various type of electrical materials such as; Conduit, Cable tray, panel board, wiring devices and cable pulling/ tagging and termination etc..

 Should have knowledge in various testing requirement such as; insulation resistance, earth resistance, illumination level test, phase sequence/ rotation test.          

                                                                                                                                                                              Should have knowledge in trouble shooting.

 Electrical Technician may work under the direction of electrical engineer and/or supervisor, in all stages of planning, execution in field construction activities.

He should have 5 to 8 years of experience

looking only for Fillipino candidates

Education - Engineering and/or technological university graduate

Professional certification - College or Technological university diploma

Should have knowledge on Process Analyzers such as; Sulphur, PH/ Conductivity, Infra Red, Moisture, Density/ Viscosity, Oxygen, Hydrogen etc. including sample conditioning system.

Good Potential for the field construction works in the long term opportunity for career development and fully utilize the capabilities gained through technical qualifications and years of experience.      

 This position requires high job experience skill level.

 This position requires a thorough understanding and ability to trouble shooting and maintain Sample Conditioning Systems.

 Should be experienced in on-line analyzers’.

He should have 5 to 8 years of experience

Looking only for Filipinos candidates

Education - Engineering and/or technological university graduate

Professional certification - College or Technological university diploma

Should have knowledge in Calibration/ Installation/ testing and commissioning including loop checking of various type of LEL, H2S. IR, detector system.

Good Potential for the field construction works in the long term opportunity for career development and fully utilizes the capabilities gained through technical qualifications and years of experience.

Should be familiar with international codes and standards used in fire systems.
 Should be familiar with various types of detectors and sensors used for fire and gas detection.

He should have 5 to 8 years of experience

Looking only for Filipinos candidates

Education - Engineering and/or technological university graduate

Professional certification - College or Technological university diploma